-- *** vSpeedCallouts v1.10 by ManosK - copyright 2017 - 2021 *** --
-- *** Forum link: http://forums.x-plane.org/index.php?/files/file/38144-vspeedcallouts-by-m/ *** --
-- *** Sounds created with NaturalReader - and further tweaked by me *** --
-- *** vSpeedCallouts was originally based on the script:
--- IXEG vSpeed Beta v0.110 by Wizball / Tom Stian - 2017
--- Forum: http://forums.x-pilot.com/forums/topic/12002-vspeed-callouts-for-ixeg-733-lua-script/
-- *** but heavily extended in a form that can accommodate a number of aircrafts, from Airliners to General Aviation
-- *** However, this script is mostly targeted for airliners and best suited for the following: *** --
-- Aircraft Design Studio/Team Authors
-- Boeing B738-800 Laminar Research
-- x737-800_v503 x737project,EADT Benedikt Stratmann, Pierre Stone
-- Boeing B738-800X Laminar Research mod by Zibo Alex Unruh
-- *** ... but in manual mode works for... just about every aircraft ! *** --
-- *** In order to manually adjust the v-Speeds just click on the relative panel BUG settings *** --
-- *** You can also assign a keyboard shortcut such as Alt+v from X-Plane's Keyboard settings, in order to toggle the view of the panel *** --
-- *** FlyWithLua Macros can also be used to toggle the panel view or disable the 80 Knots and Gear Up callouts
-- While at first this script was only intended for airliners (hence the following commented out line of code), then I just thought that it
-- would be nice not to restrict it, since it supports manual input !
-- if (PLANE_ICAO == "B738") or (PLANE_ICAO == "B744") or (PLANE_ICAO == "B741") or (PLANE_ICAO == "MD82") then
-- ********************** --
-- SETTINGS --
-- ********************** --
function file_exists(file)
local f = io.open(file, "rb")
if f then f:close() end
return f ~= nil
end
function read_file(file)
if not file_exists(file) then
logMsg("- Preferences file "..file.." not found! -")
return {}
end
logMsg("- Preferences file "..file.." found! -")
tableValues = {}
for line in io.lines(file) do
if string.sub(line,1,2) ~= '--' then tableValues[#tableValues + 1] = line end
end
logMsg("- Preferences file read! -")
return tableValues
end
-- -- Initialize preferences
local preferences_FileName = SCRIPT_DIRECTORY .. "preferences.cfg"
function get_Preferences(fileName)
local preferencesTable = read_file(fileName)
local pref_Settings_lines = {}
for i,j in pairs(preferencesTable) do
local pref_Settings_words = {}
for value in j:gmatch("[^=]+") do
table.insert(pref_Settings_words, value)
end
table.insert(pref_Settings_lines, pref_Settings_words)
-- print all line numbers and their contents
logMsg('[' .. i .. '] - ' .. pref_Settings_lines[i][1]..' = '..pref_Settings_lines[i][2])
end
return pref_Settings_lines
-- preferencesTable = nil
end
prefTable = get_Preferences(preferences_FileName)
function findSetting(searchTable, setting)
for i=1,#searchTable do
if searchTable[i][1] == setting then
if searchTable[i][2] == 'activate' then
return true
else
return false
end
end
end
return nil
end
function findSettingPos(searchTable, setting)
for i=1,#searchTable do
if searchTable[i][1] == setting then
return i
end
end
return nil
end
function setSettingNewValue(setting, newValue)
local p = findSettingPos(prefTable, setting)
logMsg ('Setting position = '..p)
prefTable[p][2] = newValue
logMsg (prefTable[p][1]..'='..newValue)
end
function ActivateSetting(settingStr)
setSettingNewValue(settingStr, 'activate')
if not onload then savePreferences(prefTable) end
logMsg (settingStr..' is now activate')
end
function DeactivateSetting(settingStr)
setSettingNewValue(settingStr, 'deactivate')
if not onload then savePreferences(prefTable) end
logMsg (settingStr..' is now deactivate')
end
function setCommandState(preference)
if preference then
return 'activate'
else
return 'deactivate'
end
end
function savePreferences(t)
local file = assert(io.open(preferences_FileName, "w"))
for i=1,#t do
str = t[i][1]..'='..t[i][2]
file:write(str.."\n")
end
file:close()
end
-- true and false have to be written with lowercase letters.
-- Set to true to enable "V2" callout and false to disable it.
Enable_V2 = findSetting(prefTable, 'Enable_V2')
-- Set to true to individually enable "80 Knots" callout and false to disable it.
Enable_80Kts = findSetting(prefTable, 'Enable_80Kts')
-- Set to true to individually enable "80 Knots" callout and false to disable it.
Enable_100Kts = findSetting(prefTable, 'Enable_100Kts')
-- Set to true to enable "Positive rate/Gear up" callout and false to disable.
EnablePosGearUp = findSetting(prefTable, 'EnablePosGearUp')
-- "80 Knots" and "Positive rate/Gear up" callouts can be mutually enabled/disabled by the relative macro in the FlyWithLua Macros
-- Change "SoundLevel" to adjust volume for the callouts. Adjust between 0.10 min - 1.00 max
SoundLevel = 0.8
-- Toggles the display of the values panel. Also controlled by the FlyWithLua Macros, as well as the assigned keyboard command "Display vSpeed values toggle"
show_values = findSetting(prefTable, 'show_values')
-- Toggles the 10,000ft in the climb or descent annunciation. Also controlled by the FlyWithLua Macros
pass_10Kft = findSetting(prefTable, 'pass_10Kft')
-- Toggles the automatic switch-on and switch-off of the landing lights at 10,000ft. Also controlled by the FlyWithLua Macros
auto_lights = findSetting(prefTable, 'auto_lights')
-- Toggles the 60Knots manual breaks annunciation when landing. Also controlled by the FlyWithLua Macros
manual_Breaks = findSetting(prefTable, 'manual_Breaks')
-- Toggles the Gear Down annunciation when landing. Also controlled by the FlyWithLua Macros
Gear_Down = findSetting(prefTable, 'Gear_Down')
-- 10K Feet Switch for enabling correct Gear Down annunciation
TenKFeetSwitch = findSetting(prefTable, 'TenKFeetSwitch')
-- *************************** --
-- DO NOT EDIT BELOW THIS LINE --
-- *************************** --
require("graphics")
function sleep(a)
local sec = tonumber(os.clock() + a);
while (os.clock() < sec) do
end
end -- end function sleep()
V1_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/V1.wav")
VR_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/Rotate.wav")
V2_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/V2.wav")
KTS80_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/80knots.wav")
KTS100_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/100knots.wav")
PosGearUp_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/PosRateGearUp.wav")
Pass10KLightsOn_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/Pass10000LightsOn.wav")
Pass10KLightsOff_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/Pass10000LightsOff.wav")
ManualBreaks60KTS_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/60KnotsManualBrakes.wav")
GearDown_Sound = load_WAV_file(SCRIPT_DIRECTORY .. "vSpeed_Sounds/GearDown.wav")
set_sound_gain(V1_Sound, SoundLevel)
set_sound_gain(VR_Sound, SoundLevel)
set_sound_gain(V2_Sound, SoundLevel)
set_sound_gain(KTS80_Sound, SoundLevel)
set_sound_gain(KTS100_Sound, SoundLevel)
set_sound_gain(PosGearUp_Sound, SoundLevel)
set_sound_gain(Pass10KLightsOn_Sound, SoundLevel)
set_sound_gain(Pass10KLightsOff_Sound, SoundLevel)
set_sound_gain(ManualBreaks60KTS_Sound, SoundLevel)
set_sound_gain(GearDown_Sound, SoundLevel)
local V1_value
local VR_value
local V2_value
local manualVSpeeds = false
local userInputActivated = false
local sValue = ""
local manualVSpeedParam = 0
local aircraft = ""
local x737800SPDREF = false
function getAircraftName()
local t = {} -- table to store the indices
local i = 0
while true do
i = string.find(AIRCRAFT_PATH, "/", i+1) -- find next "/" pattern in path
if i == nil then break end
table.insert(t, i)
end
aircraft = AIRCRAFT_PATH:sub(t[table.maxn(t)-1] + 1,AIRCRAFT_PATH.len(AIRCRAFT_PATH) - 1)
if aircraft:sub(0, 8) == "x737-800" then aircraft = aircraft:sub(0, 8) end
if string.upper(string.sub(aircraft,1,9)) == "TOLISS319" then aircraft = "tolissa319" end -- hummelmose's addition for Toliss A319
if string.upper(string.sub(aircraft,1,9)) == "TOLISS321" then aircraft = "tolissa321" end -- addition for Toliss A321
if PLANE_ICAO == "B77W" or PLANE_ICAO == "B772" or PLANE_ICAO == "B77L" or PLANE_ICAO == "B77F" then aircraft = "FF777" end -- katyjason's addition for FlightFactor 777
t = nil
i = nil
end -- end function getAircraftName()
getAircraftName()
logMsg("-"..aircraft.."-")
dataref( "AUTHOR", "sim/aircraft/view/acf_author", "readonly", 0)
logMsg(AUTHOR)
-- *** For future use. Detection of an active X-FMC plugin *** --
-- dataref( "X_FMC_ISACTIVE", "xfmc/Status", "readonly")
-- logMsg(X_FMC_ISACTIVE)
dataref( "IAS", "sim/cockpit2/gauges/indicators/airspeed_kts_pilot", "readonly")
dataref( "GS", "sim/flightmodel/position/groundspeed", "readonly")
dataref( "AGL", "sim/flightmodel/position/y_agl", "readonly")
dataref( "VSI", "sim/cockpit2/gauges/indicators/vvi_fpm_pilot", "readonly")
dataref( "IALT", "sim/cockpit2/gauges/indicators/altitude_ft_pilot", "readonly")
dataref( "THROTTLE", "sim/cockpit2/engine/actuators/throttle_ratio_all", "readonly")
dataref( "REVTHROTTLE", "sim/cockpit2/engine/actuators/throttle_beta_rev_ratio_all", "readonly")
dataref( "GEARSTATUS", "sim/flightmodel2/gear/deploy_ratio", "readonly", 0)
-- gearStatus_table = dataref_table( "sim/flightmodel2/gear/deploy_ratio" )
-- GEARSTATUS = gearStatus_table [0]
if aircraft == "B737-800X" then
dataref( "FMC_REF", "laminar/B738/fmc1/Line00_L","readonly", 5)
dataref( "FMC_REF_PAGE", "laminar/B738/fmc1/Line00_S","readonly", 0)
dataref( "BUG_V1", "laminar/B738/fmc1/Line01_L","readonly", 0)
dataref( "BUG_VR", "laminar/B738/fmc1/Line02_L","readonly", 0)
dataref( "BUG_V2", "laminar/B738/fmc1/Line03_L","readonly", 0)
end
if aircraft == "x737-800" then
dataref( "BUG_V1", "x737/systems/SPDREF/manual_v1","readonly")
dataref( "BUG_VR", "x737/systems/SPDREF/manual_vR","readonly")
dataref( "BUG_V2", "x737/systems/SPDREF/manual_v2","readonly")
-- For future use. Detection if using the default x737-800 FMS *** --
-- dataref( "USE_DEFAULT_FMC", "x737/systems/FMC/useDefaultFMS", "readonly")
-- if USE_DEFAULT_FMC then manualVSpeeds=true end
-- logMsg(USE_DEFAULT_FMC)
end
if aircraft == "A350_FlighFactor" or aircraft == "A320_FlightFactor" then -->datarefs by Oliver
-- CAUTION: you need the A320 Connector Script from FlightFactor, otherwise it won't work !!!
dataref( "FFA320_V1", "MOKNY/FFA320/Aircraft/TakeoffDecision","readonly")
dataref( "FFA320_VR", "MOKNY/FFA320/Aircraft/TakeoffRotate","readonly")
dataref( "FFA320_V2", "MOKNY/FFA320/Aircraft/TakeoffReference","readonly")
dataref( "FFA320_IAS", "MOKNY/FFA320/Aircraft/AirSpeed","readonly")
end
if aircraft == "tolissa319" or aircraft == "tolissa321" then -->datarefs by hummelmose
dataref( "BUG_V1", "toliss_airbus/performance/V1","readonly")
dataref( "BUG_V2", "toliss_airbus/performance/V2","readonly")
dataref( "BUG_VR", "toliss_airbus/performance/VR","readonly")
end
if aircraft == "FF777" then -->datarefs by katyjason
dataref( "BUG_V1", "T7Avionics/fms/v1","readonly")
dataref( "BUG_VR", "T7Avionics/fms/vr","readonly")
dataref( "BUG_V2", "T7Avionics/fms/v2","readonly")
end
function assignVSpeedsFromUserInput()
if aircraft == "x737-800" then
set( "x737/systems/SPDREF/manual_v1",V1_value)
set( "x737/systems/SPDREF/manual_vR",VR_value)
set( "x737/systems/SPDREF/manual_v2",V2_value)
set( "x737/systems/SPDREF/mode", 1) -- set SPDREF mode in V1 so that V1 and VR speeds are displayed in PFD
end
end -- end function assignVSpeedsFromUserInput()
function getVSpeedsFromFMC()
if aircraft == "B737-800X" then
if string.find(FMC_REF, "TAKEOFF REF") ~= nil and string.find(FMC_REF_PAGE, "1/2") ~= nil then
V1_value = tonumber(BUG_V1:sub(22,24))
VR_value = tonumber(BUG_VR:sub(22,24))
V2_value = tonumber(BUG_V2:sub(22,24))
end
end
if aircraft == "x737-800" or aircraft == "tolissa319" or aircraft == "tolissa321" then --> V speed adjustments by hummelmose for tolissa319
V1_value = BUG_V1
VR_value = BUG_VR
V2_value = BUG_V2
end
if aircraft == "A350_FlighFactor" or aicraft == "A320_FlightFactor" then --> V speed adjustments by Oliver
V1_value = math.floor(FFA320_V1 * 1.943844547019393)
VR_value = math.floor(FFA320_VR * 1.943844547019393)
V2_value = math.floor(FFA320_V2 * 1.943844547019393)
IAS = math.floor(FFA320_IAS * 1.943844547019393)
end
if aircraft == "FF777" then --> V speed adjustments by katyjason
V1_value = math.floor(BUG_V1 + 0.5)
VR_value = math.floor(BUG_VR + 0.5)
V2_value = math.floor(BUG_V2 + 0.5)
end
if (V1_value == nil or V1_value == -1) then V1_value = 0 end
if (VR_value == nil or VR_value == -1) then VR_value = 0 end
if (V2_value == nil or V2_value == -1) then V2_value = 0 end
if (IAS == nil or IAS == -1) then IAS = 0 end
if (GS == nil or GS == -1) then GS = 0 end
if (AGL == nil or AGL == -1) then AGL = 0 end
end -- end function getVSpeedsFromFMC()
getVSpeedsFromFMC()
-- *** log initial values for debugging purposes *** --
--logMsg(V1_value)
--logMsg(VR_value)
--logMsg(V2_value)
--logMsg("IAS: "..IAS)
--logMsg("GS: "..GS)
--logMsg("AGL: "..AGL)
PlayedKTS80 = false
PlayedKTS100 = false
PlayedV1 = false
PlayedVR = false
PlayedV2 = false
PlayedPosGear = false
PlayedPass10KLightsOn = false
PlayedPass10KLightsOff = false
SwitchedLightsOn = true
SwitchedLightsOff = false
PlayedManualBreaks = false
PlayedGearDown = false
local window_x = 150 -- Display position from right edge of window
local window_y = 250 -- Display position from top edge of window
-- *** Experimental. Examining the use of jjjLib1 *** --
-- local vSpeedPanel_plId = jjjLib1.getPlId("vSpeedCallouts")
-- local vSpeedPanel = false
function display_values_panel()
if show_values then
-- if MOUSE_STATUS ~= nil then draw_string(400, 400, "Status: "..MOUSE_STATUS.." / ".."X: "..MOUSE_X.." Y: "..MOUSE_Y.." window_x: "..window_x.." window_y: "..window_y) end
XPLMSetGraphicsState(0,0,0,1,1,0,0)
-- draw the title
graphics.set_color(0, 0, 0, 1)
graphics.draw_rectangle(SCREEN_WIDTH - window_x + 10, SCREEN_HIGHT - window_y + 200, SCREEN_WIDTH - window_x + 180, SCREEN_HIGHT - window_y + 220)
graphics.set_color(1, 1, 1, 0.8)
draw_string_Helvetica_18(SCREEN_WIDTH - window_x + 15, SCREEN_HIGHT - window_y + 202, "vSpeedCallouts")
-- draw the transparent background
graphics.set_color(0, 0, 0, 0.5)
graphics.draw_rectangle(SCREEN_WIDTH - window_x + 10, SCREEN_HIGHT - window_y + 60, SCREEN_WIDTH - window_x + 180, SCREEN_HIGHT - window_y + 200)
-- draw the parameters
graphics.set_color(1, 1, 1, 0.8)
draw_string_Helvetica_12(SCREEN_WIDTH - window_x + 20, SCREEN_HIGHT - window_y + 180, "GS: "..math.floor(GS).." m/sec")
draw_string_Helvetica_12(SCREEN_WIDTH - window_x + 20, SCREEN_HIGHT - window_y + 160, "IAS: "..math.floor(IAS).." Kts")
draw_string_Helvetica_12(SCREEN_WIDTH - window_x + 20, SCREEN_HIGHT - window_y + 140 , "AGL: "..math.floor(AGL).." m / "..math.floor(AGL*3.28084).." ft")
draw_string_Helvetica_12(SCREEN_WIDTH - window_x + 20, SCREEN_HIGHT - window_y + 120, "BUG_V1: "..V1_value)
draw_string_Helvetica_12(SCREEN_WIDTH - window_x + 20, SCREEN_HIGHT - window_y + 100, "BUG_VR: "..VR_value)
draw_string_Helvetica_12(SCREEN_WIDTH - window_x + 20, SCREEN_HIGHT - window_y + 80, "BUG_V2: "..V2_value)
-- *** Experimental. Examining the use of jjjLib1 *** --
-- jjjLib1.setColor("blue", false, false, true, false, 0.9)
-- vSpeedPanel = jjjLib1.createPanel(vSpeedPanel_plId, "vSpeeds", 870, "", "blue", true)
-- jjjLib1.setPanelPos(vSpeedPanel_plId, vSpeedPanel, SCREEN_WIDTH - 870, SCREEN_HIGHT - 180)
end
end -- end function display_values_panel()
-- *** Experimental. Examining the use of jjjLib1 *** --
-- jjjLib1.openPanel(vSpeedPanel_plId,vSpeedPanel)
function DrawVSpeedInputLine(vSpeedParam) -- Modified function based on the FlyWithLua Internals
if not userInputActivated then return end
local yOffset = 0
if vSpeedParam == 1 then yOffset = 0 end
if vSpeedParam == 2 then yOffset = 20 end
if vSpeedParam == 3 then yOffset = 40 end
-- draw the background
XPLMSetGraphicsState(0,0,0,1,1,0,0)
glColor4f(0,0,0,1)
glRectf(SCREEN_WIDTH - window_x + 102, SCREEN_HIGHT - window_y + 115 - yOffset, SCREEN_WIDTH - window_x + 140, SCREEN_HIGHT - window_y + 135 - yOffset)
-- draw the input field
glColor4f(0, 1, 0, 1)
draw_string_Helvetica_12(SCREEN_WIDTH - window_x + 105, SCREEN_HIGHT - window_y + 120 - yOffset, sValue)
-- draw cursor
glColor4f(1,1,1,1)
glBegin_LINES()
local x_pos = SCREEN_WIDTH - window_x + 105 + measure_string(sValue, "Helvetica_12")
glVertex2f(x_pos, SCREEN_HIGHT - window_y + 135 - yOffset)
glVertex2f(x_pos, SCREEN_HIGHT - window_y + 135 - yOffset - 20)
glEnd()
end -- end function DrawVSpeedInputLine()
function GetVSpeedLineFromKeyboard() -- Modified function based on the FlyWithLua Internals
if userInputActivated and KEY_ACTION == "pressed" then
RESUME_KEY = true
-- escape
if VKEY == 27 then
sValue = ""
userInputActivated = false
return
end
-- backspace
if VKEY == 8 and sValue ~= "" then
sValue = string.sub(sValue, 1, string.len(sValue)-1)
return
end
-- enter
if VKEY == 13 then
if sValue ~= "" then
--assert(loadstring(sValue))()
if manualVSpeedParam == 1 then
V1_value = tonumber(sValue)
elseif manualVSpeedParam == 2 then
VR_value = tonumber(sValue)
else
V2_value = tonumber(sValue)
end
assignVSpeedsFromUserInput()
end
sValue = ""
userInputActivated = false
return
end
-- any other number key
if (VKEY >= 48 and VKEY <= 59) or (VKEY >= 96 and VKEY <= 105) then sValue = sValue .. CKEY end
end
end -- end function GetVSpeedLineFromKeyboard()
function activateUserInput()
if show_values then -- if panel is visible
if not userInputActivated and MOUSE_X >= SCREEN_WIDTH - window_x - 40 and MOUSE_X <= SCREEN_WIDTH - window_x + 180 and MOUSE_Y >= SCREEN_HIGHT - window_y + 150 and MOUSE_Y <= SCREEN_HIGHT - window_y + 270 then
if MOUSE_STATUS == "up" then
RESUME_MOUSE_CLICK = false
else
RESUME_MOUSE_CLICK = true
end
if MOUSE_STATUS == "drag" then
if MOUSE_X < SCREEN_WIDTH - 92 and MOUSE_X > 45 then window_x = SCREEN_WIDTH - MOUSE_X + 65 end
if MOUSE_Y < SCREEN_HIGHT - 32 and MOUSE_Y > 150 then window_y = SCREEN_HIGHT - MOUSE_Y + 210 end
end
end
if not userInputActivated and MOUSE_STATUS ~= "drag" and MOUSE_X >= SCREEN_WIDTH - window_x + 20 and MOUSE_X <= SCREEN_WIDTH - window_x + 140 and MOUSE_Y >= SCREEN_HIGHT - window_y + 120 and MOUSE_Y <= SCREEN_HIGHT - window_y + 130 then
manualVSpeedParam = 1
vSpeedParam = 1
sValue = V1_value
userInputActivated = true
end
if not userInputActivated and MOUSE_STATUS ~= "drag" and MOUSE_X >= SCREEN_WIDTH - window_x + 20 and MOUSE_X <= SCREEN_WIDTH - window_x + 140 and MOUSE_Y >= SCREEN_HIGHT - window_y + 100 and MOUSE_Y <= SCREEN_HIGHT - window_y + 110 then
manualVSpeedParam = 2
vSpeedParam = 2
sValue = VR_value
userInputActivated = true
end
if not userInputActivated and MOUSE_STATUS ~= "drag" and MOUSE_X >= SCREEN_WIDTH - window_x + 20 and MOUSE_X <= SCREEN_WIDTH - window_x + 140 and MOUSE_Y >= SCREEN_HIGHT - window_y + 80 and MOUSE_Y <= SCREEN_HIGHT - window_y + 90 then
manualVSpeedParam = 3
vSpeedParam = 3
sValue = V2_value
userInputActivated = true
end
end
end -- end function activateUserInput()
function resetPanelPosition()
if show_values and not userInputActivated then
window_x = 150
window_y = 250
end
end -- end function resetPanelPosition()
function toggle_show_values()
if show_values then
show_values = false
DeactivateSetting('show_values')
else
show_values = true
ActivateSetting('show_values')
end
end -- end function toggle_show_values()
function mainVSpeedCallouts()
getVSpeedsFromFMC()
if IALT < 10300 and GS > 5 then
if math.floor(IAS) + 5 == 80 and not PlayedKTS80 and Enable_80Kts then play_sound(KTS80_Sound) PlayedKTS80 = true end
if math.floor(IAS) + 5 == 100 and not PlayedKTS100 and Enable_100Kts then play_sound(KTS100_Sound) PlayedKTS100 = true end
if math.floor(IAS) + 3 == V1_value and not PlayedV1 and V1_value > 39 and GS > 5 then play_sound(V1_Sound) PlayedV1 = true end
if math.floor(IAS) + 3 == VR_value and not PlayedVR and PlayedV1 then play_sound(VR_Sound) PlayedVR = true end
if math.floor(IAS) + 3 == V2_value and not PlayedV2 and Enable_V2 and PlayedVR then play_sound(V2_Sound) PlayedV2 = true end
if AGL > 15 and math.floor(VSI) > 10 and not PlayedPosGear and EnablePosGearUp and PlayedVR then play_sound(PosGearUp_Sound) PlayedPosGear = true end
--if AGL > 3048 and not PlayedPass10KLightsOff and PlayedPosGear then
if (pass_10Kft) and (math.floor(IALT) >= 10001) and (math.floor(IALT) <= 10010) and (not PlayedPass10KLightsOff) and (math.floor(VSI) > 0) then
PlayedPass10KLightsOff = true
play_sound(Pass10KLightsOff_Sound)
end
if auto_lights and (math.floor(IALT) >= 10001) and (math.floor(IALT) <= 10010) and (math.floor(VSI) > 0) and (not SwitchedLightsOff) then
SwitchedLightsOff = true
if aircraft == "x737-800" then
set("x737/systems/exteriorLights/leftFixedLanLtSwitch", 0)
set("x737/systems/exteriorLights/rightFixedLanLtSwitch", 0)
set("x737/systems/exteriorLights/leftRetrLanLtSwitch", 0)
set("x737/systems/exteriorLights/rightRetrLanLtSwitch", 0)
end
if aircraft == "Boeing B747-400" then
command_once("laminar/B747/toggle_switch/landing_light_IBL")
command_once("laminar/B747/toggle_switch/landing_light_IBR")
command_once("laminar/B747/toggle_switch/landing_light_OBL")
command_once("laminar/B747/toggle_switch/landing_light_OBR")
else
command_once("sim/lights/landing_lights_off")
end
end
--if AGL < 3048 and not PlayedPass10KLightsOn and PlayedPass10KLightsOff then
if (pass_10Kft) and (math.floor(IALT) <= 9999) and (math.floor(IALT) >= 9990) and (not PlayedPass10KLightsOn) and (math.floor(VSI) < 0) then
PlayedPass10KLightsOn = true
play_sound(Pass10KLightsOn_Sound)
end
if auto_lights and (math.floor(IALT) <= 9999) and (math.floor(IALT) >= 9990) and (math.floor(VSI) < 0) and (not SwitchedLightsOn) then
SwitchedLightsOn = true
if aircraft == "x737-800" then
set("x737/systems/exteriorLights/leftFixedLanLtSwitch", 1)
set("x737/systems/exteriorLights/rightFixedLanLtSwitch", 1)
set("x737/systems/exteriorLights/leftRetrLanLtSwitch", 2)
set("x737/systems/exteriorLights/rightRetrLanLtSwitch", 2)
end
if aircraft == "Boeing B747-400" then
command_once("laminar/B747/toggle_switch/landing_light_IBL")
command_once("laminar/B747/toggle_switch/landing_light_IBR")
command_once("laminar/B747/toggle_switch/landing_light_OBL")
command_once("laminar/B747/toggle_switch/landing_light_OBR")
else
command_once("sim/lights/landing_lights_on")
end
end
-- 0=up, 1= down
if math.floor(IALT) >= 9990 then TenKFeetSwitch = true end
if Gear_Down and TenKFeetSwitch and (math.floor(AGL) <= 549) and (IAS <= 190) and (GEARSTATUS == 0) and (not PlayedGearDown) then
PlayedGearDown = true
play_sound(GearDown_Sound)
end
-- (1 knot = 0.514444 m/sec)
if manual_Breaks and (math.floor(AGL) == 0) and (IAS <= 61) and (IAS >= 56) and (THROTTLE == 0 or REVTHROTTLE <= -1) and (not PlayedManualBreaks) then
PlayedManualBreaks = true
play_sound(ManualBreaks60KTS_Sound)
end
-- *** Alternative method for callout sounds, by using the XLMP FlyWithLua library *** --
-- if math.floor(IAS) + 2 == 80 and not PlayedKTS80 and Enable_80Kts then XPLMSpeakString( "80 Knots" ) PlayedKTS80 = true end
-- if math.floor(IAS) + 3 == V1_value and not PlayedV1 and V1_value > 39 and GS > 5 then XPLMSpeakString( "V1" ) PlayedV1 = true end
-- if math.floor(IAS) == VR_value and not PlayedVR and PlayedV1 then XPLMSpeakString( "Rotate" ) PlayedVR = true end
-- if math.floor(IAS) == V2_value and not PlayedV2 and Enable_V2 and PlayedVR then XPLMSpeakString( "V2" ) PlayedV2 = true end
-- if AGL > 20 and math.floor(VSI) > 10 and not PlayedPosGear and EnablePosGearUp and PlayedVR then
-- XPLMSpeakString( "Positive rate of climb. Gear up" )
-- PlayedPosGear = true
-- end
if AGL > 200 then
PlayedKTS80 = true
PlayedKTS100 = true
PlayedV1 = true
PlayedVR = true
PlayedV2 = true
PlayedPosGear = true
if aircraft == "x737-800" and not x737800SPDREF then
x737800SPDREF = true
set( "x737/systems/SPDREF/mode", 0) -- set SPDREF mode in AUTO so that V1 and VR speeds are not displayed in PFD
end
end
if GS < 10 then
PlayedKTS80 = false
PlayedKTS100 = false
PlayedV1 = false
PlayedVR = false
PlayedV2 = false
PlayedPosGear = false
x737800SPDREF = false
PlayedManualBreaks = false
PlayedGearDown = false
end
--if AGL > 3109 then
if math.floor(IALT) > 10100 then
PlayedPass10KLightsOn = false
PlayedPass10KLightsOff = true
SwitchedLightsOn = false
SwitchedLightsOff = true
end
--if AGL < 2987 then
if math.floor(IALT) < 9900 then
PlayedPass10KLightsOn = true
PlayedPass10KLightsOff = false
SwitchedLightsOn = true
SwitchedLightsOff = false
end
end
end --end function mainVSpeedCallouts()
onload = true
-- *** Main function calls, macros and keyboard command creation
create_command("FlyWithLua/vSpeedCallouts/panel_toggle", "Display vSpeedCallouts panel toggle", "toggle_show_values()", "", "")
add_macro("vSpeedCallouts Panel toggle", "show_values=true ActivateSetting('show_values')", "show_values=false DeactivateSetting('show_values')", setCommandState(show_values))
add_macro("vSpeedCallouts Reset Panel position", "resetPanelPosition()")
add_macro("vSpeedCallouts 80Kts toggle", "Enable_80Kts=true ActivateSetting('Enable_80Kts')", "Enable_80Kts=false DeactivateSetting('Enable_80Kts')", setCommandState(Enable_80Kts))
add_macro("vSpeedCallouts 100Kts toggle", "Enable_100Kts=true ActivateSetting('Enable_100Kts')", "Enable_100Kts=false DeactivateSetting('Enable_100Kts')", setCommandState(Enable_100Kts))
add_macro("vSpeedCallouts GearUp toggle", "EnablePosGearUp=true ActivateSetting('EnablePosGearUp')", "EnablePosGearUp=false DeactivateSetting('EnablePosGearUp')", setCommandState(EnablePosGearUp))
add_macro("vSpeedCallouts Auto-Lights@10,000ft toggle", "auto_lights=true ActivateSetting('auto_lights')", "auto_lights=false DeactivateSetting('auto_lights')", setCommandState(auto_lights))
add_macro("vSpeedCallouts 10,000ft annunciation toggle", "pass_10Kft=true ActivateSetting('pass_10Kft')", "pass_10Kft=false DeactivateSetting('pass_10Kft')", setCommandState(pass_10Kft))
add_macro("vSpeedCallouts 60Kts/ManualBreaks annunciation toggle", "manual_Breaks=true ActivateSetting('manual_Breaks')", "manual_Breaks=false DeactivateSetting('manual_Breaks')", setCommandState(manual_Breaks))
add_macro("vSpeedCallouts Gear Down annunciation toggle", "Gear_Down=true ActivateSetting('Gear_Down')", "Gear_Down=false DeactivateSetting('Gear_Down')", setCommandState(Gear_Down))
onload = false
do_on_keystroke("GetVSpeedLineFromKeyboard()")
do_on_mouse_click("activateUserInput()")
do_every_draw("display_values_panel()")
do_every_draw("DrawVSpeedInputLine(vSpeedParam)")
do_every_frame ("mainVSpeedCallouts()")
print ("-- vSpeedCallouts v1.10 by 'ManosK' loaded successfully --")
-- end
